Product Introduction
Turbine Flow Meter GTLT-R (Remote Cable Type): This model features a structure where the measurement sensor and the data display unit (Converter) are installed separately. Even if the sensor is exposed to extreme environments with high temperature, high pressure, or severe vibration, the display unit can be installed in a location where operators can check it safely and conveniently (such as on a wall) to monitor flow data in real-time.
Product Features
Device Protection: By separating the electronic circuits from heat and vibration, the lifespan of the device is significantly extended.
User Convenience: Flow meter data from units installed in hard-to-reach high places or underground pipes can be checked at eye level.
Applications
- Environmental Facilities: Underground water supply pipelines, near sedimentation tanks in wastewater treatment plants.
- Heavy Industry and Plants: High-temperature chemical solvent transfer lines, vibration zones around large pumps.
General Specifications
| Item | Technical Parameters |
|---|---|
| Display | LCD: Total, Instantaneous |
| Nominal Diameter & Connection | Thread: DN4, 6, 10, 15, 20, 25, 32mm / Thread, Flange: DN40mm / Flange: DN50, 65, 80, 100, 125, 150, 200mm |
| Application | Liquids without impurities and with low corrosivity (e.g., Water, Diesel, Oil, Alcohol). |
| Accuracy | ±1.0% of F.S. |
| Repeatability | ±0.1% |
| Measuring range | 0.04 ~ 800 m³/h |
| Range ability | 1:10, 1:15, 1:20 |
| Diameter | DN4 ~ DN200 |
| Working Condition | Nominal Diameter: DN4 to DN200. / Fluid Temperature: -20°C to +120°C / (Customizable up to 150°C). / Ambient Temperature: -20°C to +60°C. / Humidity: 5% to 95%. Operating Pressure: 1.6 to 6.3 MPa (High-pressure custom options up to 42 MPa available). |
| Connection | Flange / Thread / Tri-Clamp |
| Material | Body and Flange Material: SUS304 or SUS316L. / Bearing and Shaft Material: Tungsten Carbide. |
| Power | DC 24V or 3V 10Ah Lithium Battery. |
| Power consumption | Less than 1W. |
| Output | 4-20mA, Pulse, RS485 |
| Communication | RS485-MODBUS, HART, PROFIBUS-DP |
| Enclosure | IP65 |
| Flange | DIN: Standard PN16 (Options: PN25, PN40)./ ANSI: 150LB, 300LB, 600LB, 900LB. / JIS: 10K, 20K, 30K, 63K. |
| Cable gland | M20 x 1.5 Or NPT 1/2" |